FAAC Gate Repair in Addison, TX | Total Gate Repair Care Dallas
Total Gate Repair Care Dallas provides independent FAAC gate repair across Addison, TX — diagnosing and fixing operators, control boards, loop detectors, and mechanical hardware without manufacturer involvement or authorization wait times. What makes our FAAC work different here is the market itself: Addison is almost entirely commercial and multifamily, and most of the FAAC systems we service are running high daily cycle counts at apartment complexes, office parks, and delivery-lane gates along Belt Line Road. If your FAAC operator is struggling, Timothy Lewis can usually pinpoint the fault before he opens the panel. Call (817) 328-3536 for a free estimate.
Why Addison Property Managers Choose Us for FAAC Service
Eleven years working gates — and nothing but gates — means Timothy Lewis has seen every FAAC failure mode worth knowing. Before founding Total Gate Repair Care Dallas, Timothy completed the electrical and mechanical systems program at Brookhaven College, which sits about ten minutes from central Addison. That coursework, combined with more than a decade of hands-on FAAC diagnosis in the field, means he’s not reading a service manual on your driveway.
We carry OEM-compatible FAAC parts on the truck, so most repairs in Addison close on the first visit. We’re not manufacturer-authorized — we’re independent, which means faster scheduling and no brand-loyalty upsell. With 539 verified reviews averaging 4.9 stars built over 11 years of focused gate work, the proof record backs the claim. Timothy handles the job himself.
Common FAAC Gate Repair Problems We Solve in Addison
- Motor overheating and burnout on high-cycle commercial operators. Addison’s Belt Line Road corridor runs restaurant supply, food-service delivery, and retail freight through commercial properties all day. A FAAC 750 or 770 operator cycling 80-plus times daily in 105°F North Texas heat will burn out its motor winding well ahead of its rated service life. We test draw current and thermal load before recommending a rewind or replacement — not after.
- Control board failure and erratic behavior. Voltage spikes from North Texas storms and heat-related capacitor degradation take out FAAC electronic boards faster in this climate than manufacturers’ specs assume. We carry replacement boards for the FAAC 7PCB and 455D series and can swap and reprogram on-site.
- Slide-gate track wheel destruction from shifting soil. Addison’s expansive clay soils heave and contract with every wet winter and baking summer cycle. That ground movement torques gate post footings out of true, which throws slide-gate track alignment off and chews through FAAC bottom rollers and guide wheels. We realign track, true the post where possible, and replace worn hardware — fixing the cause, not just the symptom.
- Loop detector failure and false triggers. The aging 1980s and 1990s apartment complexes along Quorum Drive and Addison Road often have original loop detector wire embedded in cracked, heaved asphalt. Ground movement severs induction loops, causing FAAC operators to either hold open or refuse to cycle. We test loop resistance, cut and splice new wire, or install replacement detector cards depending on what the system needs.
- Obstruction sensor misalignment and gate reversals. High-traffic commercial gates in Addison take a physical beating — delivery trucks clip safety edges, photocell brackets get knocked out of alignment. A misaligned FAAC safety sensor triggers constant reversals that look like a board fault. We calibrate the sensor system first, before touching electronics.
FAAC Service in Addison: What Local Conditions Mean for Your Equipment
Addison covers 4.4 square miles, and almost none of it is single-family residential. That geographic reality shapes everything about how gate repair work plays out here. The apartment communities built along Quorum Drive and Addison Road in the 1980s and 1990s were sold partly on the promise of controlled-access perimeter gates. Those original operators — many of them LiftMaster and Linear at the time of installation — have largely been replaced or supplemented with FAAC commercial-grade units as communities upgraded. But the gate frames, post footings, and loop detector conduit are still original in many cases, and three decades of North Texas clay-soil movement have done their work on all of it.
The practical result: a FAAC operator in Addison is often fighting a misaligned frame and a compromised loop at the same time. A technician who only fixes the operator and leaves the structural drift in place will be back in six months. Timothy addresses both on the same visit because he stocks the mechanical hardware and runs the welder in-house — no outsourcing to a metal shop, no second appointment.
FAAC Models & Products We Service in Addison
We work across the FAAC commercial and residential product lines, including:
- FAAC 750 and 770 underground operators
- FAAC 400 and 402 series swing-gate actuators
- FAAC 844 and 868 sliding gate motors
- FAAC C720 and C721 control boards
- FAAC safety edges, photocells, and loop detector cards
We use OEM-compatible replacement parts — not cheap aftermarket substitutes that void remaining warranties and introduce new failure points. For Addison’s high-cycle commercial environments, that parts quality difference is measurable in operator lifespan. We stock common FAAC consumables on the truck so most Addison service calls close the same day Timothy arrives.
FAAC Service Pricing in Addison
FAAC gate repair pricing in Addison reflects the commercial nature of the work here — most calls involve multi-tenant or high-cycle systems that require more diagnostic time than a residential driveway gate.
| Service | Typical Range |
|---|---|
| Diagnostic / service call | $75 – $125 |
| Control board replacement (FAAC) | $280 – $480 |
| FAAC motor / operator replacement | $550 – $1,200 |
| Loop detector repair or replacement | $150 – $320 |
| Track wheel / roller replacement | $120 – $250 |
| Gate frame realignment (welding) | $200 – $450 |
Final cost depends on parts availability, the condition of the existing frame and wiring, and how many systems are involved on multi-gate properties. The free estimate tells you exactly what you’re looking at before any work begins. Call (817) 328-3536 to schedule — no commitment required to get a number.
Serving Addison, TX — Our Local Coverage Area
We’re based in the Addison area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — FAAC Gate Repair in Addison
No — we’re an independent gate repair company, not manufacturer-authorized. That means we’re not bound to FAAC’s scheduling queue or service pricing. We use OEM-compatible parts and follow FAAC’s own technical specifications, so the repair quality is there without the wait.
We use OEM-compatible FAAC parts — the same component specifications the manufacturer uses — sourced from verified distributors. For Addison’s commercial systems running heavy daily cycles, we specifically avoid no-name aftermarket boards and motors; the failure rates in high-temperature, high-cycle environments are measurably worse. We’ll tell you exactly what’s going in before we install it.
Most single-fault repairs — a control board swap, a motor replacement, a loop detector fix — close in two to three hours on the first visit. More complex jobs involving structural realignment alongside electrical repair can run a full half-day. Because Timothy stocks common FAAC parts on the truck and handles welding in-house, there’s rarely a second appointment for parts procurement. We’ll give you a time estimate when we schedule the call.
We service the full range of FAAC commercial and residential operators commonly found in Addison — including the 750, 770, 844, and 868 series motors, the 400 and 402 swing actuators, and C720/C721 control boards. If your property has an older FAAC unit installed when the complex was built in the 1980s or 1990s, we’ve likely seen it. Tell us the model and the age of the system, and we can usually walk you through what to expect before we arrive.
A diagnostic call runs $75–$125. From there, a control board replacement lands between $280 and $480, and a full operator swap typically falls in the $550–$1,200 range depending on the model and site conditions. Addison’s commercial properties sometimes have additional costs tied to loop detector repair or frame realignment from soil-heave damage — we’ll quote those line items clearly upfront. Call (817) 328-3536 for a free estimate; the number is real before any commitment is made.
Service Areas Near Addison
Beyond Addison (75001), Total Gate Repair Care Dallas regularly services FAAC systems in Farmers Branch, FAAC in Carrollton, University Park, and Highland Park. If your property sits close to Addison’s borders on Midway Road, Belt Line Road, or the Dallas North Tollway corridor, we’re already in your area most days. Call to confirm coverage for your specific address.
Book Your FAAC Service in Addison Today
If your FAAC operator is acting up — cycling too slowly, throwing fault codes, refusing to close, or simply dead — call (817) 328-3536. Timothy Lewis handles the job himself, same-day appointments are available for urgent situations, and the estimate is free. One call, one visit, done right.
Reviewed by Timothy Lewis, Owner & Lead Technician at Total Gate Repair Care Dallas, serving Addison and the greater Dallas area for over 11 years.